Daily maintenance of the heat shrink packaging machine

Summary:Heat shrink packaging machine as a more advanced packaging methods on the market at present, with its own advantages, has become the heart of many packaging companies, widely used in a variety of small products packaging, the use of the process demonstrated the advantages of environmental protection and economy is to add to its color.

Release time:

2025-07-29

Heat shrink packaging machine as a more advanced packaging methods on the market at present, with its own advantages, has become the heart of many packaging companies, widely used in a variety of small products packaging, the use of the process demonstrated the advantages of environmental protection and economy is to add to its color. In the face of modern automatic heat shrink packaging machine to find their place in the market, in many industries have a full heat shrink packaging machine figure, it is this more means the development of enterprises, so in the development, only to continue to accelerate their own development speed, in order to better achieve the rapid development of enterprises

Daily maintenance of the heat shrink machine.

1, the packaging machine temperature of -10 ℃ ~ 50 ℃, relative humidity of 85?under the surrounding air with corrosive gases, dust, explosive hazards.

2, often check whether the packaging machine components intact, such as vacuum packaging machine vacuum pump is working properly, the vacuum pump motor is not reversed, etc.

3, the position of the oil tea 3D transparent film packaging machine should be checked frequently. The normal oil level for the oil window of 1/2-3/4 (do not exceed). The color of the vacuum pump oil turns black. This time it is necessary to change the new oil. Usually, every 1 to 2 months of continuous work is replaced once.

4, the impurity filter needs to be disassembled and cleaned frequently (usually 1-2 months to clean once, such as packing debris, will reduce the cleaning time).

5, after 2-3 months of continuous work, you need to open the back cover 30, lubricate the sliding parts and switch bumps, lubricate the heating bar connection operation, depending on the use.

6、Heating bar and silicone bar should be kept clean and free of foreign matter so as not to affect the sealing quality.

7、On the heating bar, the second layer of adhesive below the heating film plays the role of heat insulation material. If there is damage, it should be replaced in time to avoid short circuit.

8, the user prepares the working air source and expansion air source. The working pressure of the vacuum packaging machine is set to 0.3MPa is more appropriate. Unless there are special circumstances, do not adjust too much.

9, the packaging machine must be installed with a reliable grounding device, in the process of transportation shall not be tilted or bumped, not to mention the drop transport.

10, ventilation before powering up when working. When shutting down the machine, turn off the power supply first, then turn off the power. In case of emergency, please turn off the power immediately.

Heat shrink packaging machine shrinkage temperature out of control failure is the main reason

How to improve the effectiveness of the heat shrink machine

Heat shrink packaging machine shrinkage temperature out of control failure is the main reason

How to improve the effectiveness of the heat shrink machine

Other Blogs